Dynamic equipment balancing services
We carry out professional balancing of rotating equipment using modern Balanset-1A instruments and dedicated balancing machines.
On-site balancing
Balancing in a rotor's own bearings — the work is carried out directly at the customer's site, with no need to dismantle the equipment.
What we balance:
- Fans and flue-gas (induced-draught) fans (up to 15 m in diameter)
- Pumps (centrifugal, axial)
- Electric motors (up to 500 kW)
- Crushers and mills
- Mulchers (forestry, agricultural)
- Agricultural machinery (combine harvesters, seed drills)
- Other rotating equipment
The benefits of on-site balancing:
- No cost of dismantling the equipment
- Minimal downtime (2–4 hours)
- Balancing under real operating conditions
- We work at the customer's premises
Workshop balancing on machines
Balancing on dedicated equipment — for rotors that require high accuracy or a complete fault inspection.
What we balance:
- Turbine rotors (steam, gas)
- Machine-tool spindles (grade G0.4–G1)
- Centrifuges and separators (G6.3 under ISO 1940-1; G1–G2.5 in practice)
- Compressor rotors
- Shafts and drums during a major overhaul
Balance quality grades:
| Grade G | Type of equipment | Method |
|---|---|---|
| G0.4 | Precision spindles, gyroscopes | In its own bearings or on a machine — the mechanical condition sets the limit |
| G1 | Grinding spindles | In its own bearings or on a machine |
| G2.5 | Gas and steam turbines, compressors | On a machine (recommended) |
| G6.3 | Pumps, fans, motors up to 950 rpm, centrifuges and separators | On a machine or in the bearings |
| G16 | Crushers, mills | In the bearings (usually) |
Vibration diagnostics
Comprehensive diagnostics of the technical condition of equipment:
- Spectral analysis of vibration (FFT)
- Detecting bearing faults (BPFO, BPFI, BSF, FTF)
- Diagnosing shaft misalignment
- Identifying mechanical looseness
- Condition monitoring (trends)
Cost of services
| Item | Price (+ VAT) |
|---|---|
| Vibration diagnostics with a written report — per machine, always | €300 |
| Balancing S — up to 15 kW / 50 kg | +€250 |
| Balancing M — 15–75 kW / 50–500 kg | +€450 |
| Balancing L — 75–300 kW / 0.5–2 t | +€700 |
| Balancing XL — over 2 t / high-speed | from +€1,200 |
| Weight attachment: your fitter / our engineer / with welding | included / +€150 / +€400 per rotor |
| Travel | 20 km each way included, then €0.60/km both ways |
| Daily allowance | €140/day (a single machine within 50 km — none) |
| Several machines in one visit | −20% from the 2nd machine, −30% from the 10th |
| Minimum invoice per visit | €500 |
| Workshop balancing | On request |
* Diagnostics are charged on every visit; balancing is added only when the measurements show it will help. The minimum invoice per visit is €500. Work out the price for your machine in the calculator →
How to request the service
- Get in touch whichever way suits you (phone, email, WhatsApp)
- Describe the equipment: type, power, speed, the problem
- Receive a quotation with prices and timescales
- Agree a date for the work to be carried out
- Get the result and a balancing report
Get in touch
We'll answer your questions and prepare a quotation